Tube settlers, also called lamella clarifiers, are used to remove solids in the waste water treatment.tube settlers are single plastic profiles combined to tubes. This design multiplies the sedimentation area up to 15 times per square meter surface area and helps to improve sedimentation in water and waste water treatment plants.Different executions support a better process and cost reduction of the plant.
Tube settlers use multiple tubular channels sloped at an angle of 60° and adjacent to each other, which combine to form an increased effective settling area. This provides for a particle settling depth that is significantly less than the settling depth of a conventional clarifier, reducing settling times.Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The tube settler’s channel collects solids into a compact mass which promotes the solids to slide down the tube channel.
Tube settlers offer an inexpensive method of upgrading existing water treatment plant clarifies and sedimentation basins to improve performance. They can also reduce the tank age/footprint required in new installations or improve the performance of existing settling basins by reducing these olids loading on downstream filters.Made of lightweight PVC PP, tube settlers can be easily supported with minimal structures that often incorporate the effluent trough supports.They are available in a variety of module sizes and tube lengths to fit any tank geometry,with custom design and engineering offered by the manufacturer.
Tel +86 311 67790805