How to replace the cooling tower fill?

In order to cooling tower can be used for a long time and guarantee normal cooling, after aging phenomenon in a cooling tower fills, can cause local cooling tower fill fall off phenomenon, cause the efficiency of the cooling tower heat loss, into a vicious cycle.

In this case, the fill will be very easy to break and collapse due to excessive tension, which will reduce the cooling capacity of the cooling tower and damage the heating equipment. Therefore, the cooling tower fill must be replaced after a long period of use.

But how to replace the cooling tower fill?

Let us share the way.

Firstly

Before the cooling tower fill is replaced, the staff shall protect the other equipment nearby to prevent the damage of other equipment.

Secondly
Before removing the old cooling tower fill, it need to be sure to turn off the motor power supply, otherwise the safety will not be guaranteed.

Thirdly
When pasting the cooling tower fill, it make sure that the cooling tower fill has enough space to solidify after pasting, and ensure that the contact points of the cooling tower fill can be uniform and tight when pasting.

Fourthly
When placed in a new cooling tower fill, it need to clean up cooling tower in the dirt and garbage, and then put the cooling tower fill tower in turn, do not squash and abuses in the process of just into the fill, and ensure that every filler neat, should be around the corner of the cooling tower and gap spacing to minimum.

Do you need to learn more information about it?

Feel free to contact us, please.