1.1 Hot dippped galvanized steel water tank panel
The panel is made of hot dipped galvanized steel.
The size of the panel is : 1220*1220mm, 1000*1000mm,1000*500mm, 500*500mm.
The thickness of the panel mainly includes: 5mm-16mm,etc. It is different according to the tank dimension.
1.2 Flanges
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.We can make it according to your request.
1.3 Reinforcement Method
All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water.
The top panel is supported by top panel support, which shall be made of hot-dipped galvanized material.
1.4 Bolt. nut & washers
Hot-dipped galvanized material or stainless steel material.
1.5 Sealing material
Non-toxic P.V.C foam tape shall be used in between the joints.
1.6 Ladders and Level Indicator
Internal & external ladder shall be made of hot-dipped galvanized or stainless teel.
Contact me for more information: summer@coolingtowerinfill.com