Home >> Products >> Cooling Tower Fill >> Cross Flow Cooling Tower Fill-CF915/1220/1520-MA
  • Cooling Tower Accessories
  • PVC Fill For Cooling Tower
  • PVC Fill For Cooling Tower Supplier

Cross Flow Cooling Tower Fill-CF915/1220/1520-MA

product description

Cooling Tower Fill Discription

Cooling Tower PVC Fill, also called cooling tower infill film media. It is one of the most important components in cooling tower. It’s function is increase the exchange area of the gas and working fluid in order to achieve the requested cooling requirement. The working fluid was distributed onto the cooling tower PVC fill and spread into a thin film uniformly, by increasing the air-media interface and allowing waste heat to evaporate at an accelerated rate.


The heat resistance is the main factor influencing the cooling efficiency for the cooling tower PVC fill. And the quality of the raw material used for producing cooling tower PVC fill will influence the cooling tower fill's service time. Latino always adapt the high quality cooling tower PVC fill for the cooling tower. 

Cooling Tower Fill Principles of Operation

The application of pp film fill is to cooling hot waste. The fill is sheet type, so water flowing have much more surface area. hot water will be cooled quickly. This is the reason people use film fill proverbially. The principles of operation is:

   Cooling tower fill makes hot water have much more surface area with sheet and air and the medium of tremendously extended film fill, so that hot water is cooled quickly. After be cooled the water is flow in a water container from which it is pumped again to cooling other hot water,and the warm air leaving the fill and releasing from the above of the cooling towers, and like this Continuously cooling air from bottom and release warm air from above to keep cooling tower cooling hot water continuously.

   The waste heat produced in industrial production or refrigeration process is generally driven away by cooling water. The cooling tower functions as heat exchange between the cooling water carrying waste heat and air in the tower.

What is the purpose of fill in a cooling tower?

The purpose of fill in a cooling tower is to cool water to make full use of water resources, reduce the load of urban tap water supply network, and reduce the operating cost, cooling water is treated by cooling tower and recycled.

Matters needing attention when replacing the cooling tower packing.

 ♦ The waveforms between the monolithic and the monolithic must be diagonally staggered so that they have good thermal resistance.

 ♦ The cuboidal packing assembly unit is most suitable for matching with the square tower and with the circumference of the circular cooling tower. A gap will be formed, and it needs to be filled with a different number of single sheets according to the size of the gap.

 ♦ Once the plug is blocked, it is not easy to clean. When the jam is serious, it needs to be replaced as a whole and it will increase the cost

Cross Flow Cooling Tower Fill-CF915/1220/1520-MA


Lengthas your request
Thicknessfrom 0.28mm to 0.38mm
Sheet Space19mm

Used in crossflow cooling tower

Other types

Cross Flow Cooling Tower Fill-CF915/1220/1520-MA